E18 subject to alterations Ground precision parts – materials and coatings Carrier material = Cold work steel, alloyed (WS) Material no.: 1.2210, 1.2067 or similar Characteristics: Cold work steel tools have a hard, wear-resistant surface layer and a relatively tough, lower impact core. Cold work steels can be used at tool temperatures up to approx. 200°C. WS = material code = "1" e.g. Order no. = 239.1. ... Carrier material = Cold work steel, high-alloyed, with 12% Cr (HWS) Material no: 1.2436, 1.2379 or similar Characteristics: See WS. High chromium content increases resistance to wear and toughness and contributes to resistance to corrosion. Molybdenum increases heat resistance and additionally improves corrosion and resistance to wear. HWS = material code = "2" e.g. Order no. = 260.2. ... Carrier material = High-speed steel (HSS) Material no: 1.3343 or similar Characteristics: High-speed steel tools are typically used in applications with high cutting speeds. The high temperatures require particularly excellent tempering resistance and hot hardness. High-speed steel can be used at tool temperatures up to approx. 600°C. HSS = material code = "3" e.g. Order no. = 220.3. ... Carrier material = High-speed steel, nitrided (HST) Material no: 1.3343 or similar Characteristics: See HSS. The nitrogen nitrides diffused in during the nitriding treatment give the tool part even greater resistance to wear and the best possible protection against cold welding. HST = material code = "4" e.g. Order no. = 223.4. ... Carrier material = High-speed steel produced by powder metallurgy (ASP23/ASP2023) Material no: 1.3395 or similar Characteristics: High-speed steel produced by powder metallurgy. Greater toughness and resistance to wear than HSS due to excellent homogeneity of the material. ASP 23 ASP 2023 = material code = "6" e.g. Order no. = 223.6. ... Carrier material = Hot-work tool steel, nitrided (NWA) Material no: 1.2344 or similar Characteristics: This is a nitrided hot-work steel (NWA), see description below. The additional black oxidation forms a uniform oxide layer that improves corrosion protection and optimises the running-in behaviour. NWA-O = Werkstoffkennziffer = „7“ e.g. Order no. = 237.7. ...
RkJQdWJsaXNoZXIy MTIwNzY0